OUR PRODUCTS

C.M Gold brand name is synonymous with cement and enjoys a high level of equity in the Indian market. Our range of cements.

Ordinary Portland Cement (OPC) 53 Grade which surpasses the requirements of IS12269-1989 Grade. It is produced by inter grinding of high grade clinker (with high C3S content) and right quality gypsum in predetermined proportions. It is recognized for its high early strength and excellent ultimate strength because of its optimum particle size distribution, superior crystalline structure and balanced phase composition and hence widely used and suitable for speedy construction, durable concrete and economic concrete mix designs.

Advantages

• Low percentage of alkalies, chlorides, magnesia and free lime results in longer life of concrete structures.
• Standard resistance to sulphate attack due to less C3A content.
• Durable Concrete.
• Feasible for economical concrete mix designs.
• Standard quality ensures substantial savings in cement consumption.
• Development of very high compressive strength in early stages helps in early de-shuttering.

Ordinary Portland Cement (OPC) 43 Grade is a premium quality cement manufactured from world renowned Narzi limestone. The 43 Grade cement develops high early strength as well as high ultimate strength.

Advantages

• High early strength facilitates speedy construction.
• Low alkali content in cement provides protection against alkali aggregate reaction.
• High fineness results in better workability enduring dense, durable concrete.
• Development of very high compressive strength in early stages helps in early de-shuttering.
• Standard resistance to sulphate attack due to less C3a content.
• Standard quality ensures substantial savings in cement consumption.

Portland Slag Cement (PSC) is a premium composite cement produced from superior quality Narzi limestone. Slag cement begins in an iron blast furnace. Carefully controlled amount of iron ore, along with limestone or dolomite are fed into a blast furnace and heated to 2,700°F. When molten, the iron is tapped for steel production and the slag is diverted to the granulator. Here, the slag is rapidly quenched with large quantities of water.
The process minimises crystallisation and forms granulated slag, which is composed principally of calcium aluminosilicate of lime, which has a glassy form. Formation of this glass provides slag cement with its cementitious properties. At this point, the slag possesses the consistency of fine sand. It is then dewatered and dried. Finally, the slag is ground to a fine powder and becomes slag cement, or it is inter-ground with Portland cement clinker to make a blended cement.

Advantages

• Higher Compressive and Flexural Strengths.
• Protection against Chloride and Sulphate attack.
• Reduces heat of hydration.
• High Carbonation Resistance.
• Highly resistant to alkali aggregate reaction.
• Protection of Reinforcement.
• Better cohesive mix.
• Improved Workability.
• Improved Resistance to chemical attack.
• Reduced Permeability.
• Improved Strength.
• Environment Friendly.
• Easier Finish.